Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com, Fix Now 1844-851-9487

Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com is a common error witnessed by Windows 7 and 8 users who received Windows 10 as a free upgrade. Most users were able to upgrade to Windows 10 without encountering any issues.

But some users have reported issues related to the activation of Windows 10. The error mostly occurs while activating the Windows key. The problems start typically start appearing when you are attempting to activate a copy of Windows through the Windows Activation wizard. Your system becomes unstable, and the important statement files are missing. Error 0Xc004F050 occurs only in case of a clean install.

Reasons you may see Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com

  • You have entered a product key which cannot be used for the activation of Windows. You require a different valid Windows 10 product key to activate it. An invalid product key may cause it.
  • It may occur when the license validity interval has expired, or in case the license has not been signed correctly.
  • Inadequate method of installing, deletion of the critical system files, misconfigured system and other issues may lead to Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com.
  • After a clean install, it removes everything from the Primary Drive. Thus, Windows cannot find the Hardware ID that is used for the verification of your license.
  • The error may occur for Windows 7, Windows Server 2008 and Windows Vista-based computers in case you have entered the key for the beta version of the operating system, whereas you are using the released version of the operating system.
  • The activation servers were busy although you have upgraded to Windows 10. When you have initiated the process of upgrading from Windows 7 or Windows 8.1, Windows 10 shall be updated automatically, or you can select ‘Activate’ to try again.
  • You might have used the free upgrade offer to procure Windows 10, but it is not activated even after a reinstall. The activation should occur automatically except in case of significant hardware changes.

Thus, there are multiple reasons which may lead to Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com.

Symptoms of Windows 10 Activation Error 0Xc004F050

While activating a copy of Windows Vista or Windows 7 through the Windows activation wizard, you may receive an error notifying you that the product key which you entered didn’t work and that you need to change the product key or buy a new one.

Error 0Xc004F050 implies that your CD is not working correctly, and Microsoft typically blames it on server volume. So, you should wait for a few days before activating Windows 10 on your system.

How to Fix Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com?

If you want to know How to fix 0Xc004F050, some of the solutions have been mentioned below:

Windows 10 Up-gradation through Automated Telephone System: While activating Windows 10, most users perform a fresh install. Rather, you should complete an upgrade. Otherwise, it may lead to error 0Xc004F050. The preceding forms of Windows used to be upgraded after a clean install, however, Windows 10 is entirely different. You should first look to upgrade from either Windows 7 or 8 and only then a clean installation can be performed. You can use the Media Creation Tool for an upgrade. If you look for a clean installation right off the bat, then Windows 10 looks to check for the authentication of the Windows 7 or 8. Hence, it should not be initiated at first.

When you are in possession of an authentic copy of Windows 7 or 8, your Windows 10 operating system will also be activated quickly and labelled as authentic. After the up-gradation to Windows 10, a clean install can be initiated only after formatting the hard drive. It is the most effective way to avoid errors.

However, if it does not work, you should click on ‘start’ and then click on ‘my computer’. Go to the ‘System properties’ on the toolbar and then begin Windows activation. If you have an administrative password, you should type it and select continue. Select ‘show me other ways to activate’. Next, use the automated phone system, read the instructions and proceed accordingly. If this step does not work, you should follow the other steps enlisted in How to fix 0Xc004F050.

Reconfirm your product key: In case the error occurred while upgrading from the older version of Windows 10 to the newest version, you should confirm the product key. Go to ‘start’, type ‘settings’, and then go to the settings page. Then, navigate to ‘update and security’, and then select the ‘activation’ option. Then in the Windows activation window, click on the ‘change product key’. Then enter your administrative password, and continue. Next, type your product key, and click on ‘next’. Then read the instructions given on screen, and follow them to complete the process.

Activation troubleshooter: When you are using Windows 10 version 1607 or the later versions, you can reactivate Windows using the Activation Troubleshooter if you reinstalled Windows or made a hardware change. If you want to use the troubleshooter, you have to click on the ‘start’ button, then select ‘settings’, then go to ‘Update & Security, select ‘Activation’ and then scroll down to select troubleshoot. You should be an administrator to be able to use this option. Windows 10 has a set of troubleshooting tools which lets the users solve the technical issues quickly.

Activate Windows immediately after a hardware modification: Windows 10 Activation Error 0Xc004F050 is quite common among the users who have modified their hardware recently. You should know that Windows 10 sees motherboard alteration as a huge change. Thus, when the operating system comes across such significant hardware alterations, it stops functioning. If error 0Xc004F050 has occurred after the replacement of your motherboard, you can follow specific steps to end the problem. Reinstall Windows 7 or Windows 8 and then try upgrading to Windows 10. Buy the license key of Windows 10.

Upgrade to Windows 10 right away: Use the installation disc to clean install Windows 7 or Windows 8 and then activate your copy. Then download all the updates so that the Windows 10 Upgrade notification flashes. You can also download Windows Media Creation Tool and use it to upgrade your system to Windows 10 immediately. After the upgrade has been finished, check your Activation status. It should be activated by now.

If you want to remove the old Windows installation folder, you can create a Flash Drive by using Windows Media Creation tool. Then clean install Windows 10. When it asks for the product key, you need to skip it. After the completion of the installation, Windows shall automatically activate your copy.

Note that after a clean installation, you shall not be able to get back to your previous Windows 7 or Windows 8. Therefore, you should clean install if you are sure about using Windows 10. If you need to verify the activation status, you have to click on start and then click Computer. Then select System properties on the toolbar, and go to the Windows activation section to check the status. After reading all these methods, you are well-acquainted with How to fix 0Xc004F050.

What to do when the product key activation is not working?

Product activation was initiated in the Windows family with the release of Windows XP during 2001. The purpose of activation is to pair the product key with your system. It is used as a method of copy protection, and it defines support rights, depending on the product channel from where the software was obtained such as OEM, Retail, Volume License or Trial. In the case of Windows 10, Microsoft has made a significant advancement concerning product description. It has made Windows 10 free for the Windows 7.8/8.1 users for the first year after activation. Since Windows 10 Activation Error 0Xc004F050 is closely related to product activation, it is important to know how it works and what to do if it does not.

Product Activation in Windows 10

In Windows 10, you can create a bootable copy on DVD or USB and reinstall Windows 10, thereby eradicating the need to reinstall the qualifying version. It shall reactivate automatically. Your device is registered with the Product Activation Center in Windows 10. It also keeps a copy of the system’s activation in the Cloud Store. While performing reinstallation or clean reinstallation, the installation checks with the Activation server find the unique installation ID, thus validates your system.

Steps to follow to activate Windows 10 when product key is not working

If your product key didn’t work 0xc004f050, you should try to follow these steps:

Check the activation status

  • Go to the Start Menu, then type Activation, and click on ‘See if Windows is activated’.
  • If the activation status reads ‘connect to the internet to activate Windows’, you need to click on ‘Activate’ to initiate the manual installation. It will require an internet connection. In case the product key didn’t work 0xc004f050 shows again, you may need to follow other steps.

Give the SLUI 4 command.

  • Click on ‘Start’, and type ‘run’, then you need to open the first result.
  • In the ‘Run’ box, type SLUI 4 and then click on ‘ok’.
  • When an activation prompt takes over your system, you need to select your country and then click ‘Next’.
  • After you have selected your country, call the number and seek the help of Microsoft Support. They shall provide you with assistance when product key didn’t work 0xc004f050 appears repeatedly.

Select the option of ‘Do this later.’

If your activation key is not working, and Windows 10 Activation Error 0Xc004F050 Site Microsoft.Com is being displayed continuously, then there might be a problem with the server because of a large number of users. You need to try again in a few hours or days. You can select the ‘Do this later’ option, and Windows 10 shall be activated automatically.

Restart your system and check your internet connection

If your product activation key is not working, the issue might be related to your Internet connection. There might be issues with your network settings, and this might be stopping you from installing Windows.

This problem may be solved by restarting your router or modem. Turn your computer off using the power button and restart it after 30 seconds. After your modem/router boots, try activating Windows 10. In case the problem persists, you can restart your PC and then begin with the installation. Sometimes, there may be issues with your PC that might be preventing the activation.

Ensure that it is the correct version

Your activation key shall not work if you are attempting to activate the wrong version of Windows 10. It has two versions, namely, Home and Pro, and they provide different features.

Therefore, the key for Windows 10 Pro shall not work for Windows 10 Home version and vice versa. Ensure that you are using the activation key for the proper version of Windows.

Check your license status.

If your product key is not working, you should try checking and resetting the license status. Press your Windows Key and X or right click on the Start button. Select PowerShell (Admin) or Command Prompt (Admin). Enter slmgr.vbs -rearm command, and then press the enter button. When you have run the command, close it and restart your system. Then try activating Windows 10.

Try forcing the activation.

You need to run a command in the Command Prompt to fix the problem. Start Command Prompt and then enter slmgr.vbs -ato command and press enter. When the command has been executed, and the Windows 10 Activation Error 0Xc004F050 Fix will have been initiated.

Use Command Prompt to activate Windows 10

You can activate Windows 10 by using Command Prompt. You need to start Command Prompt as an administrator, and then enter slmgr.vbs -ipk ****-**** -**** -**** (the ‘*’ should be replaced by the actual activation key) command. The problems related to product activation may be solved using this command.

Ensure that you are using the key only on a single system

If your product activation key is not working, then you might have already used it to activate Windows 10 on some other system. You have to deactivate the other copy and then activate it on your system. Note that the key is connected to the hardware on which it was activated. Although you may not be using Windows 10 on your old system, you have to remove the license information from the hardware. You can contact Microsoft support for help if you do not know how to do it.

Check whether your product activation key is genuine.

Windows 10 will not be activated on your PC if you do not own a genuine key. If you have used the key for the installation of Windows previously, then the problems are being caused by something else. But if it is your first time, then probably the key is not genuine. Ensure that you buy the key from Microsoft or its official distributors instead of the third-party websites. It shall aid you in Windows 10 Activation Error 0Xc004F050 Fix.

Conclusion Windows is one of the best-operating systems. However, it has some rare complexities. Licensing and activation problems are common, and you can get assistance for Windows 10 Activation Error 0Xc004F050 Fix.